Bộ sạc pin THSCHG

Bộ sạc pin THSCHG

Thông số kỹ thuật Tektronix THSCHG:

Characteristic Description
Capacity52 Wh, 4.8 Ah
Output 10.8 VDC
Charge time5.5 hrs
Adapter requirements18 V / 0.84 A
Input voltage range 15–23 V
Input current limiter0.714 A ±5%
Operating temperature 0 °C to +40 °C (+32 °F to +104 °F)
Storage temperature -20 °C to +60 °C (-4 °F to +140 °F)
Humidity10 to 30 °C (50 to 86 °F) 95% ±5%
30 to 40 °C (86 to 104 °F) 75% ±5%
40 to 45 °C (104 to 113 °F) 45% ±5%
Emission and Immunity EN 61316-1:2006

Safety Summary
To avoid potentialhazards, use this product only as specified.
To Avoid Fire or Personal Injury
Recharge battery properly.Recharge the battery pack only
for the recommended charge cycle at the recommended
temperature.
Use proper battery charger.Use only the THSCHG charger
or the THS3000 series oscilloscope to charge the THSBAT
Lithium-Ion battery pack.
Do not operate without covers.Do not operate this product
with covers or panels removed.
Do not operate with suspected failures.If you suspect there is
damage to this product, have it inspected by qualified service
personnel.
Do not operate in wet/damp conditions.
Keep product surfaces clean and dry.
Use proper AC adapter.Use only the AC adapter specified for
this product

Describes the use of the battery charger Instructions

This document describes the use of the battery charger.

This manual applies to: THSCHG

Tektronix Battery Charger THSCHG

The THSCHG is a battery charging base for use with the THSBAT ( 747-1872 ) Li-ion battery pack. When used with the external power supply for THS3000 series oscilloscopes, it will typically charge the battery pack in approximately 5.5 hours.

đại lý THSCHG, nhà phân phối THSCHG, bộ sạc pin tektronix THSCHG

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *