Thứ Sáu , Tháng Năm 17 2019
Home / Máy hiển thị sóng Oscilloscopes / Máy hiển thị sóng số Tektronix MSO2002B
Máy hiển thị sóng số Tektronix MSO2002B

Máy hiển thị sóng số Tektronix MSO2002B

Máy hiển thị sóng số Tektronix MSO2002B

Thông số kỹ thuật máy hiển thị sóng MSO2002B

Băng thông : 70Mhz
Số kênh : 2 kênh , 16 kênh logic
Tốc độ lấy mẫu : 1Gsa/s
Rise Time : 5ns
Độ dài sóng: 1Mega

Màn hình : TFT 7 inch, 480×234
Giao tiếp :USB 2.0, Ethernet(LAN) Port option DPO2CONN)
Nguồn : 100 to 240 V ±10%,45~65Hz; 80W
Kích thước : 180mm x 377mm x 134mm
Khối lượng : 3.6Kg
Phụ kiện gồm: Phần mềm, dây nguồn, HDSD, đầu đo Tektronix TPP0100, đầu logic 16 kênh P6316

nhà phân phối MSO2002B | máy hiện sóng số Tektronix MSO2002B | tài liệu MSO2002B

Acquisition Modes
Sample Acquire sampled values.
Peak Detect Captures glitches as narrow as 3.5 ns at all sweep speeds.
Averaging From 2 to 512 waveforms included in average.
Roll Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div
Automatic measurements
29, of which up to four can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area and Cycle Area.
Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, or waveform cursors.
Arithmetic Add, subtract, and multiply waveforms.
Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.
OpenChoice® Desktop
Enables fast and easy communication between a Windows PC and your oscilloscope using USB or LAN. Transfer and save settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis.
IVI driver
Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI, Microsoft .NET, and MATLAB.
e*Scope® Web-based remote control
Enables control of the oscilloscope over a network connection through a standard web browser. Simply enter the IP address or network name of the oscilloscope and a web page will be served to the browser. Transfer and save settings, waveforms, measurements, and screen images or make live control changes to settings on the oscilloscope directly from the web browser.
Display system
Display type 7 inch (180 mm) wide format liquid crystal TFT color display.
Display resolution 480 horizontal × 234 vertical pixels (WQVGA).
Waveform styles Vectors, Dots, Variable Persistence, Infinite Persistence.
Graticules Full, Grid, Cross Hair, Frame.
Format YT and XY.
Maximum waveform capture rate Up to 5,000 wfm/s.
USB 2.0 high-speed host port Supports USB mass storage devices, printers, and keyboards. One port available on rear panel and one on front panel.
USB 2.0 high-speed device port
Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488, and direct printing to all PictBridge®-compatible printers.
LAN port (Ethernet) RJ-45 connector, supports 10/100BASE-T (requires DPO2CONN).
Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector (requires DPO2CONN).
Auxiliary input Front-panel BNC connector. Input Impedance 1 MΩ ±2%. Max input 300 VRMS CAT II with peaks ≤ ±450 V.
Probe compensator output voltage and frequency Front-panel pins
Amplitude 5 V
Frequency 1 kHz
Kensington-style lock Rear-panel security slot connects to standard Kensington-style lock.
Power source voltage 100 to 240 V ±10%
Power source frequency
45 to 65 Hz (90 to 264 V)

360 to 440 Hz (100 to 132 V)

Power consumption 80 W maximum
Optional TekVPI® external power supply 
Output voltage 12 V
Output current 5 A
Power consumption 50 W

đại lý Tektronix MSO2002B | nhà phân phối Tektronix MSO2002B | đại lý MSO2002B

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *